Braided mesh (Rabitsa)
GOST 5336-80 or TU U 28.7-00191046-016-2003
Range of application:
- fencing of gardens;
- fencing of tennis courts, sports grounds and playgrounds;
- slope fixation;
- mine working support;
- heat-insulating material reinforcement;
- boiler setting.
Material:
- low-carbon wire without coating;
- galvanized low-carbon wire.
 Fencing needs no repair or painting for many years in case the mesh used for the fencing is manufactured of galvanized wire. Life time of this type of mesh is 3 times longer than of mesh without coating.
The mesh is manufactured on the braiding automatic machines and has a good quality. Braided mesh is produced of separate flat spirals that are made of round wire and interlaced one into another. At the junction spiral endings can be turned down to each spiral or joined by twisting.
Mesh is characterized by size of cell side (by wire axes) and by wire diameter. According to the cell shape mesh is subdivided into rhombic and square. Cell size of braided mesh is from 5 mm to 100 mm, the diameter of wire is from 0.8 mm to 5.6 mm. Width of the mesh cloth is 1000-3000 mm. Mesh is delivered in rolls. Mesh manufactured in compliance with all process requirements becomes very fast and has a good tensile strength.
Braided mesh characteristics
Sizes in millimetres
| Nominal size of cell side (inner) |
Wire diameter |
Max. mesh width |
Min. mesh length, m |
| for mesh according to TU |
for mesh according to GOST |
| Mesh with rhombic cell |
| 5.0 |
0.8-1.2 |
1.2 |
1000 |
10 |
| 6.0 |
0.9-1.4 |
1.2 |
1000 |
10 |
| 8.0 |
1.0-1.6 |
1.2; 1.4 |
1000 |
10 |
| Mesh with rhombic or square cell |
| 10.0 |
0.9-1.6 |
1.2; 1.4 |
1800 |
10 |
| 12.0 |
1.0-1.8 |
1.4; 1.6 |
1800 |
10 |
| 15.0 |
1.2-1.8 |
1.6 |
1800 |
10 |
| 18.0 |
1.4-2.0 |
- |
1800 |
10 |
| 20.0 |
1.2-2.2 |
1.8; 2.0 |
2000 |
10 |
| Mesh with square cell |
| 25.0 |
1.6-2.5 |
2.0; 2.5 |
2000 |
10 |
| 30.0 |
1.6-2.6 |
- |
3000 |
10 |
| 35.0 |
1.8-2.6 |
2.0; 2.5 |
3000 |
10 |
| 40.0 |
1.8-3.2 |
- |
3000 |
10 |
| 45.0 |
2.2-3.4 |
2.5; 3.0 |
3000 |
10 |
| 50.0 |
2.0-3.4 |
3.0 |
3000 |
10 |
| 60.0 |
2.4-3.4 |
3.0 |
3000 |
10 |
| 70.0 |
2.6-3.4 |
- |
3000 |
5 |
| 80.0 |
2.8-4.2 |
4.0 |
3000 |
5 |
| 90.0 |
3.0-4.5 |
- |
3000 |
5 |
| 100.0 |
4.0-5.6 |
5.0 |
3000 |
5 |
| Note. On the customer's request mesh of other diameters of wire and with other inner size of cell sides can be produced. |
 Delivery of braided mesh
Braided mesh is delivered in rolls.
The roll consists of one piece of mesh; its length depends on the mesh number and can be from 3.5 m to 10 m. Maximal weight of the roll is 80 kg. Mesh of numbers from 80 to 100 can have roll weight up to 250 kg.
Equipment and manufacturing technique
"Silur" disposes of the most up-to-date equipment for fabrication of welded mesh for animal and poultry breeding. Wire of own manufacturing is used as raw material. The equipment for wire fabrication includes drawing machines, annealing and hot galvanizing aggregates.
Braided mesh is manufactured on the braiding automatic machines UDAFV.
Wire with very high degree of zinc adherence with steel base is used for braided mesh production, this distinguishes the galvanized mesh manufacturing technique from the traditional one. Before the mesh braiding the wire is tested for coiling for double-ply diameter. Mesh manufactured of such high-quality wire has a good form and a long life time.
Test of mesh is made in the laboratory of "Silur" equipped with up-to-date test equipment.
At all stages of processing beginning with the entrance control of raw material production is exposed to the regular control. Rates of control - conditions, devices, periodicity, and responsibility are stated in special instructions.
|
