Spring carbon steel wire

1. Spring carbon steel wire according to GOST 9389-75

Application: for manufacturing of springs coiled in a cold condition and not subjected to hardening.

Wire diameter: from 0.2 to 6.0 mm.

According to the precision of manufacturing wire is produced of: single precision and extended.
According to the mechanical properties wire is produced of: grades А, Б, В and classes 1, 2, 3.

Mechanical properties

2. Round spring wire according to DIN 17223

Application: for helical springs manufacturing (pressure, stretching and torsion springs), spring rings and other wire springs.
Wire diameter: from 0.30 to 7.00 mm.

Mechanical properties

3. Patented spring cold-drawn wire of alloyed-free steel according to EN 10270

Application: for mechanical springs manufacturing.
Wire diameter: from 0.53 to 6.00 mm.

Mechanical properties

Delivery of wire:

Wire is coated with a continuous thin layer of preservative oil protecting it from corrosion. On the customer's request wire can be produced without oiling.

Wire is delivered:

• Ø 0.53-0.60 mm – in 10-30 kg bundles or on reels BS-60;
• Ø 0.60-1.20 mm – in bundles with the mass up to 80 kg or in Z-2 type coils;
• Ø 1.30-3.00 mm – in 100-150 kg bundles or in Z-2 type coils;
• Ø 2.50-6.00 mm – in bundles with the mass 100-150 kg or in coils with the mass up to 1000 kg.

Bundles, coils and reels are packed up in waterproof paper and polymer film.

Note: on the customer's request wire of intermediate diameters can be produced. Delivery of 2.2 mm diameter wire for furniture industry is possible.